 Technical Guides Database
|
 TRD Sway Bars, Control Arm, Tie Rod Crzy Joe
|
|
Anti-Sway Bars Reduces body roll during cornering without affecting ride quality. Adding (or increasing the size/stiffness of) a rear bar reduces understeer (front-end washing out in cornering). Adding (or increasing size/stiffness) of a front bard reduces oversteer (rear end comes around during cornering). Adding or stiffening front bar can eliminate tailing-throttle oversteer, the condition when rear-end steps out (slides) if you abruptly lift-off gas pedal or hit brakes in a corner. Application....................(Front Dia.).....(Rear Dia.).....Notes.........................Part No. Corolla GTS, 85..............1"..................3/4"..............Live axle/no IRS Celica, 76-81.................1"..................3/4"..............................................240-SB5065 Celica, 82-85.................1"..................3/4"..............Live axle/no IRS...........240-SB5066 Celica, 82-85 GTS...........1"..................3/4".............IRS only......................240-SB5061 Celica, 86-88.................1"..................5/8"..............Not for AllTrac.............240-SB5068 Celica, 86-89................................................ .........Front wheel drive.........127-BX-073C Supra, 82-85..................1-1/8"............3/4"..............................................240-SB5060 Supra, 86-90..................1-1/8"............15/16"...........................................240-SB5059 Cressida, 85-86...............1"..................3/4".............................................240-SB5067 MR2, 85-89 S/C & N/A.............................................Adj. , see mounting kit....240-SB5064 MR2, Supercharged...................................... ...........Adjustable..................127-B-07881-FA Truck, 2WD, 84-88................................................ .Mtg. kit below..............127-BX-E69 Mounting Kits for Sway Bars MR2, 86-87....................Rear mounting kit, hardware, required......................240-AK5064 Truck, 2WD, 84-88..........Mounting kit............................................... .........127-KA-E6906-R Lower Control Arm for Autocross, Racing Lower a car (or raising one for rallying) changes the angle of the lower control arms and alters camber. To restore proper alignment geometry, special lower control arms are necessary to push the lower ball-joint outward. Originally developed for international rally and Group A competition, but have been popular in Autocross. Application....................Description........ .................................................. .Part No. Corolla, 85-87................Right side, std, length, tubular fabricated control arm...48068-AE801 Corolla, 85-87................Same as above, left side.........................................48069 -AE801 Corolla GTS, 85-87..........Stamped steel control arm, right side, +10mm.............48068-AE851-10 Corolla GTS, 85-87..........Same as above, left side, +10mm..............................48069-AE851-10 Corolla GTS, 85-87..........Same as above, right side, +15mm............................48068-AE851-15 Corolla GTS, 85-87..........Same as above, left side, +15mm..............................48069-AE851-15 Corolla, 75-79................Same as above, right side, +20mm.............................48068-TE351-A Corolla, 75-79................Same as above, left side, +20mm..............................48069-TE351-A Corolla, 80-83................Stamped steel control arm, ridght side, +20mm............48068-TE751-A Corolla, 80-83................Sam as above, left side, +20mm................................48069-TE751-A Tie Rod for Long Control Arms When using TRD lengthened Lower Control Arms, you will need longer steering tie rods. Two are required, together with one each of the rod-end nuts listed. These will fit Corolla and Celica. Description....................Part No. Lengthened tie rod.........45461-TE351 Rod end nut, right side....94300-SP009 Rod end nut, left side......94300-SP010 !!!!!Please note some parts may no longer be in production!!!!!
|
2026-04-30
Tokyo, Japan
NF
NB-NS-PE
ON-QC
MB
SK
AB
BC |
This site was designed and maintained by:
